Kali ini saya akan berbagi konsep dasar Cara Seting Mikrotik DHCP Server Dengan VLAN menggunakan beberapa device yang berbeda seperti mikrotik & cisco.

Cara Seting Mikrotik DHCP Server Dengan VLAN

topologinya adalah seperti dibawah ini:

IP Address Configuration On Mikrotik:

/ip address add address=192.168.0.56/29  network=192.168.0.56 broadcast=192.168.0.63 interface=WAN

Setup VLAN on Mikrotik Router:

/interface vlan
add name=100-MANAGEMENT  interface=LOCAL  vlan-id=100
add name=200-FINANCE  interface=LOCAL  vlan-id=200
add name=300-SUPPORT  interface=LOCAL  vlan-id=300

/ip address
add address=10.10.10.1/24 interface=100-MANAGEMENT
add address=172.16.1.1/24 interface=200-FINANCE
add address=192.168.1.1/24 interface=300-SUPPORT

Create an IP address pool:

/ip pool add name=100-MANAGEMENT ranges=10.10.10.1-10.10.10.254
/ip pool add name=200-FINANCE ranges=172.16.1.1-172.16.1.254
/ip pool add name=300-SUPPORT ranges=192.168.1.1-192.168.1.254

DNS Configuration:

/ip dns set allow-remote-requests=yes cache-max-ttl=1 cache-size=5000 max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4

DHCP Server Configuration for VLAN:

/ip dhcp-server enable 0
/ip dhcp-server add interface = LOCAL address-pool = 100-MANAGEMENT
/ip dhcp-server add interface = LOCAL address-pool = 200-FINANCE
/ip dhcp-server add interface = LOCAL address-pool = 300-SUPPORT

/ip dhcp-server  network add address = 10.10.10.0/24 gateway = 10.10.10.1 dns-server = 8.8.8.8 comment=”100-MANAGEMENT”
/ip dhcp-server  network add address = 172.16.1.0/24 gateway = 172.16.1.1 dns-server = 8.8.8.8 comment=”200-FINANCE”
/ip dhcp-server network add address = 192.168.1.0/24 gateway = 192.168.1.1 dns-server = 8.8.8.8
comment=”300-SUPPORT”

NAT Configuration:

/ip firewall nat
add chain=srcnat action=masquerade src-address=192.168.1.0/24 out-interface=WAN
add chain=srcnat action=masquerade src-address=172.16.1.0/24 out-interface=WAN
add chain=srcnat action=masquerade src-address=10.10.10.0/24 out-interface=WAN

Default Gateway Setup:

/ip route add dst-address=0.0.0.0/0  gateway=192.168.0.1

Basic Configuration VLAN Configuration Using Cisco Switch:

CISCO>enable
CISCO#configuration terminal
CISCO(config)#interface fastethernet 0/1
CISCO(config-if)#switchport mode trunk
CISCO(config-if)#switchport trunk allowed vlan all
CISCO(config-if)#switchport nonegotiate
CISCO(config)#vlan 100
CISCO(config-vlan)#name MANAGEMENT
CISCO(config)#vlan 200
CISCO(config-vlan)#name FINANCE
CISCO(config)#vlan 300
CISCO(config-vlan)#name SUPPORT
CISCO(config)#interface fastethernet 0/2
CISCO(config-if)#switchport mode access
CISCO(config-if)#switchport access vlan 100
CISCO(config)#interface fastethernet 0/3
CISCO(config-if)#switchport mode access
CISCO(config-if)#switchport access vlan 200
CISCO(config)#interface fastethernet 0/4
CISCO(config-if)#switchport mode access
CISCO(config-if)#switchport access vlan 300
CISCO#wr

Selamat belajar 😀